Magnetic (Mag) Drills and Horizontal Magnetic Drills from ALFRA

American Punch Company provides ALFRA Brand magnetic drills and horizontal magnetic drills used in the steel fabrication industry. Each mag drill is equipped with fully adjustable motors for maximum stroke and are supplied with transport case, tool holder, coolant tank, and safety strap. We also supply stock sizes of CobraCut annular cutters.

Magnetic Drills

MD 32/50
1/2” to 1-1/4” (22 lbs.)

Core Drill	7/16” – 1-1/4”
Cutting Depth	2”
Twist Drill	1/16” – 1/2”
Input	1050W – 10A
1 Speed Gearbox	400 RPM
Tool Holder	3/4” Weldon Shank
Arbor Stroke	5”
Motor - Adjust. Stroke	3-5/8”
DRILL 5” BELOW MAGNET BASE
Voltage	110V
	(230V on request)
Magnet	1900 LBS/8000 N
Magnet Foot	2-3/4” x 6-5/16”
Weight	22 LBS

MD 38/50
1/2” to 1-1/2” (30 lbs.)

Core Drill	7/16” – 1-1/2”
Cutting Depth	2”
Twist Drill	1/16” – 1/2”
Input	900W – 10A
1 Speed Gearbox	450 RPM
Tool Holder	3/4” Weldon Shank
Arbor Stroke	5-9/16”
Motor - Adjust. Stroke	5”
DRILL 5-9/16” BELOW MAGNET BASE
Voltage	110V
	(230V on request)
Magnet	2880 LBS/12000 N
Magnet Foot	3-3/4” x 8”
Weight	30 LBS

MD 50/50
1/2” to 2” (35 lbs.)

Core Drill	7/16” – 2”
Cutting Depth	2”
Twist Drill	1/16” – 7/8”
Input	1200W
2 Speed Gearbox	250/450 RPM
Arbor	#2MT
Arbor Stroke	6-11/16”
Motor - Adjust. Stroke	3-15/16”
Voltage	110V
	(230V on request)
Magnet	3600 LBS/16000 N
Magnet Foot	3-1/8” x 9”
Weight	35 LBS

MD 75/4
1/2” to 2-3/8” (48 lbs.)

mpi MAGNETIC POWER SAVER
Core Drill	7/16” – 2-3/8”
Cutting Depth	2”
Twist Drill	1/16”-5/8”
	1-1/4” w/MT
Input	1800W
4 Speed Gearbox	110/175/
	245/385 RPM
Arbor	#3MT
Arbor Stroke	7-1/2”
Motor - Adjust. Stroke	2-3/8”
Voltage	110V
	(230V on request)
Magnet	4800 LBS/20000 N
Magnet Foot	3-1/8” x 9”
	30° Total Swivel
Weight	48 LBS

(top of page)

Horizontal Magnetic Drill

This rugged, low profile, industrial design magnetic drill is perfect to use where standard standup mag drills are just too big. At just 27 pounds, it can be easily moved into the tightest places and mounted to walls or even overhead. Its powerful dual coil, 2700lb /12000n magnet holds it safely in any position. The down feed is carried out by means of a ratchet that can be mounted to either side. No need for a separate inventory of special cutters. This unit uses the same cutter as your standard standup magnetic drill.

MDH-32
1/2” to 1-1/4” (27 1/2 lbs.)

horizontal magnetic drill

Core Drill	1/2” – 1-1/4”
Cutting Depth	1”
Tool Holder	STD. 3/4” SHANK
Weight	27-1/2 lbs (12.5kg)
Height with Handle	9”
Height w/o Handle	7-1/4”
Input	900W
Voltage	110V
1 Speed Gearbox	450 RPM
Coolant	Thru the Spindle
Power Cord	9’
Magnet Foot	3-1/2” x 7-7/8”
Magnet	2700 lb/12000n at 1/2” min. mat’l thickness